Cable Blowing Machines Market Size, Share Global Analysis Report, 2022 – 2028

Industry Insights

[215+ Pages Report] According to Facts and Factors, the Global Cable Blowing Machines Market Size was valued at USD 89.45 million in 2021 and is predicted to increase at a CAGR of 4.5% to USD 105.12 million by 2028. The study examines the market in terms of revenue in each of the major regions, which are classified into countries. The report analyses the global cable blowing machines market’s drivers and restraints, as well as the impact they have on-demand throughout the projection period. In addition, the report examines global opportunities in the cable blowing machines market.

Market Overview

A fiber cable may be easily blown across curves and extended distances with the help of electric cable blowing equipment. When deploying this equipment, additional accessories such as winches, capstans, and pull tapes are required. Electric-powered cable blowers are safer for workers since they apply less force to the fiber material. Furthermore, the primary reason for their higher procurement rate versus other sorts is that they are the most cost-effective. The key drivers driving market growth include increased fiber network connection expansion, which is likely to drive demand for cable installation service equipment such as cable blowing equipment, among others.

Growth Drivers

The expansion of telecommunication infrastructure in developing countries is expected to contribute significantly to the growth of worldwide cable blowing equipment volume sales. The increased deployment of data centers throughout the world is projected to drive market growth for fiber optic installation equipment such as cable blowing equipment. Over the projected period, fiber optic cable utilization is expected to rise rapidly, exceeding demand for conventional technologies such as copper lines. As a result, new market opportunities for overhead and underground cable laying equipment, including cable blowing equipment, are projected to develop. Demand for cable blowing machines used for after-sales services is expected to rise as the network of fiber optic cables expands.

Fiber to the Home/Fiber to the Premises (FTTH/P) networks are being built by operators all over the world. The absence of needed technical knowledge and competent personnel for running various types of equipment is a fundamental constraint faced by market participants. Additionally, the various types of installation and service equipment used are particularly sensitive to hardware damage, which can result in breakdowns and increased costs. Technically skilled employees are required to install these wires, which raises training expenses for businesses. Another factor impeding the growth of the installation equipment market is its high cost.

COVID – 19 Impact

The COVID-19 problem highlighted the significance of having basic digital skills in order to access information and services for the entire community. The increase in data traffic for supporting digital skills is controlled through data centers created specifically for healthcare and other human capital applications. To reach a specific population in the region, these data centers require high-speed and long-distance transmission. Due to COVID-19, the market had a very slight decrease in year-on-year growth as compared to previous years. According to current business financials, the top eight companies in the cable blowing equipment industry saw a modest decrease in income generation as a result of the COVID-19 outbreak. In 2021-2022, demand increased as various activities, such as semiconductor fabrication for the telecommunications sector and many similar stalled projects, were resumed.

Segmentation Analysis

The global cable blowing machines market is segregated based on Power Type, and Cable Type.

In terms of Power Type, pneumatically powered cable blowing equipment accounted for more than one-third of the market throughout the forecast period. Fiber cable blowing devices come in handy in this situation since they help blast fiber cables into HDPE pipelines. Pneumatically powered cable blowing equipment employs high-velocity air to blow a cable into a conduit. Prior to cable blowing, the air supply should be dehumidified and filtered. Optical fibers, micro coaxial and multipair cables, and other wires are blown into a preinstalled duct using pneumatically powered cable blowing equipment. For cable installers and operators in winding courses, the system is straightforward to utilize. They are less expensive than hydraulically powered cable blowers.

In terms of Cable Type, the fastest-growing category will be micro-ducts. The ongoing need to lower the total cost of ownership and improve network flexibility and scalability, particularly in large Fiber to Home deployments, as well as the emerging deployment of the backbone and access network required to support 5G networks, are expected to drive growth in the micro-duct for cable market. Over the years, blown fiber micro cable systems have grown and developed, and the most modern air-blown cabling solutions and installation procedures meet the needs of today's networks in practically every industry. As a result, the micro-duct segment is predicted to grow at a quicker rate over the forecast period.

Report Scope

Regional Landscape

Europe will add the most value to the global cable blowing equipment market. Europe has a strong foundation for the manufacture, design, and research of established technologies, which are being used to help expand its semiconductor sector. Due to the obvious semiconductor industry's strategic relevance, it has always drawn political attention around the world. The European semiconductor industry is expected to continue its robust growth during the forecast period to meet the rising demand for semiconductor materials in emerging technologies such as artificial intelligence (AI), autonomous driving, the Internet of Things (IoT), and 5G, as well as competition among key players and consistent R&D spending.

Competitive Landscape

The report contains qualitative and quantitative research on the global Cable Blowing Machines Market, as well as detailed insights and development strategies employed by the leading competitors. The report also provides an in-depth analysis of the market's main competitors, as well as information on their competitiveness. The research also identifies and analyses important business strategies used by these main market players, such as mergers and acquisitions (M&A), affiliations, collaborations, and contracts. The study examines, among other things, each company's global presence, competitors, service offers, and standards.

List of Key Players in the Global Cable Blowing Machines Market:

• Plumettaz S.A (Switzerland)
• Condux International, Inc. (US)
• General Machine Products (KT) LLC (US)
• Fremco (Denmark)
• LANCIER CABLE GmbH (Germany)
• Stanleyay (India)
• SKYFIBER TECH (Turkey)
• Jakob Thaler (Germany)
• Upcom Telekomunikasyon (Turkey)
• NINGBO MARSHINE POWER TECHNOLOGY CO., LTD. (China)
• Ningbo Huaxiang Dongfang Machinery and Tools of Power CO., Ltd. (China)
• Genius Engineers (India)
• Prayaag Technologies (India)
• JETTING AB (Sweden)
• Adishwar Tele-Networks Pvt Ltd (India)
• Gabe's Construction (US)
• KNET (South Korea)
• Hexatronic Group (Sweden)
• Anfkom (China)
• Ningbo Eastern-Grid Power CO., LTD. (China)

The global cable blowing machines market is segmented as follows:

By Power Type

• Hydraulically Powered
• Pneumatically Powered
• Electric-driven
• Drill-driven

By Cable Type

• Micro-duct
• Normal Duct

By Region

• North America
  • The U.S.
  • Canada
  • Mexico
• Europe
  • France
  • The UK
  • Spain
  • Germany
  • Italy
  • Nordic Countries
    • Denmark
    • Sweden
    • Norway
  • Benelux Union
    • Belgium
    • The Netherlands
    • Luxembourg
  • Rest of Europe
• Asia Pacific
  • China
  • Japan
  • India
  • Australia
  • South Korea
  • Southeast Asia
    • Indonesia
    • Thailand
    • Malaysia
    • Singapore
    • Rest of Southeast Asia
  • Rest of Asia Pacific
• The Middle East & Africa
  • Saudi Arabia
  • UAE
  • Egypt
  • South Africa
  • Rest of the Middle East & Africa
• Latin America
  • Brazil
  • Argentina
  • Rest of Latin America